Disconnecting Fuel Line From Carburetor; Disconnecting Pulse Line From Fitting; Removing Heat Deflector Screw And Ground Lead; Disconnecting Fuel Solenoid Lead - Kohler Courage SV470 Service Manual

Section 8
Disassembly
If a fuel pump is used, disconnect the pulse line
Figure 8-11. Disconnecting Fuel Line from
Carburetor.
Figure 8-12. Disconnecting Pulse Line from Fitting.
special washer, which also secures the ground
8.4
Ground Lead.
3. If the carburetor uses a fuel solenoid, carefully
cut the plastic tie strap and disconnect the fuel
solenoid lead from the wiring harness. See Figure
Figure 8-14. Disconnecting Fuel Solenoid Lead.
4. Slide the carburetor outward and disconnect the
Figure 8-15. Removing Carburetor.