Overview; Intended Use - YASKAWA Solectria PVI 25TL-208 Installation And Operation Manual

Installation and Operation Guide SOLECTRIA® PVI 25TL-208, PVI 50TL-480 and PVI 60TL-480
5. Monitor conditions until low irradiance ~30min prior to sunset. If safe, turn OFF AC and DC switches on the
inverter and proceed with normal troubleshooting procedures listed in Table 7-1.

2. Overview

Intended Use

The SOLECTRIA PVI 25TL-208, PVI 50TL-480, and PVI 60TL-480 are grid-tied, photovoltaic (PV), three-phase inverter,
suitable for use in commercial or utility-scale installations. The SOLECTRIA PVI 25TL-208, PVI 50TL-480, and PVI
60TL-480 inverters are an integral part of a typical PV installation, which typically includes PV modules, DC power
distribution equipment, a PV inverter, and AC power distribution equipment. The SOLECTRIA PVI 25TL-208, PVI
50TL-480, and PVI 60TL-480 inverters convert solar power (DC) to AC power suitable for use in buildings and back
feeding onto the electrical grid. This inverter is a grid following inverter, which means it synchronizes the output
current with the voltage waveform of the grid. The SOLECTRIA PVI 25TL-208, PVI 50TL-480, AND PVI 60TL-480
inverters are an ideal product for use in rooftop, carport, or ground mount installations where quality and
performance are paramount.
The SOLECTRIA PVI 25TL-208, PVI 50TL-480, and PVI 60TL-480 inverters are not intended for use in a micro-grid or
off-grid application. Although successful integration into AC-coupled storage systems is possible, Yaskawa Solectria
Solar does not support or provide guidance for use in this type of application.
Figure 2-1 Grid-Tied PV System
DOCR-071030-A (10/7/2022) Page 10 of 131