YASKAWA Solectria PVI 25TL-208 Installation And Operation Manual page 98

Installation and Operation Guide SOLECTRIA® PVI 25TL-208, PVI 50TL-480 and PVI 60TL-480
R R This log can store up to 128 running history messages. This includes normal operating events
UNNING ECORD
such as the inverter turning on, going into standby and turning off.
F R This log can store up to 128 fault codes.
AULT ECORD
Device Information
Press the ESC key to leave the main "operation interface" and press ENT to access the
arrow keys, scroll down to the
shown in Figure 6-19.
This menu provides the information to identify the version of boards in the inverter, model number, serial number
and data logger information. This information may be required when contacting Yaskawa Solectria Solar service.
Please follow the guidelines below before on-grid operation to eliminate possible dangers and to ensure safety.
Start-Up
Automatic start-up: The inverter will start up automatically when the output voltage and power of PV arrays meet
the set value, AC power grid is normal, and the ambient temperature is within allowable operating range.
Manual Power ON/OFF: Manual Power ON/OFF is required after regulation setting or manual (fault) shut-down.
Press ESC to and ENT to access the
"ON/OFF" submenu, move the cursor to "ON" and press ENT to start the inverter. Then the inverter will start up
and operate normally if the start-up condition is met. Otherwise, the inverter will go to stand-by mode.
DOCR-071030-A (10/7/2022)
D I
EVICE NFORMATION
Main Menu
Measurement Data
Setting
Power On/Off
History Record
Device Information
Figure 6-19 Device Information
M M , move the cursor to "ON/OFF" and press ENT. Once in the
AIN ENU
submenu and press ENT to check the device information, as
Inverter information
Inverter Model:
Inverter SN: 0 0100 0000 0002
PmaxLim:
DSP Ver: 01.01.020×70DF
HMI: 01.06 0×0100
MiniMCU: 99.99
Reserve
Data Logger Information
Data Logger SN 0 0000 0000 0000
IP 0.0.0.0
Subnet Mask 0.0.0.0
Gateway 0.0.0.0
DNS Server 0.0.0.0
Address Range
WARNING
M M
AIN ENU
SmaxLim:
DSP Boot:02.00
HMI Boot:01.00
CPLD:15.00
P1/2
P2/2
. Using the
Page 98 of 131