Connecting The Ac Adapter - Konica Minolta CF-300 Instruction Manual

Connecting the AC Adapter

WARNING
Always use the AC adapter supplied as a standard accessory or specified replacement AC
adapter with the CF-300, and connect it to an AC outlet of the rated voltage and frequency.
Failure to do so may damage the CF-300 or the AC adapter, causing a fire or electric shock.
If the CF-300 will not be used for a long time, disconnect the AC adapter from the AC outlet. Accumulated dirt or
water on the prongs of the AC adapter's plug may cause a fire and should be removed.
Do not insert or disconnect the AC adapter with wet hands. Doing so may cause electric shock.
Insert the power plug fully and securely. Incomplete inserting may cause fire or electric shock.
Do not disassemble or modify the AC adapter. Doing so may cause a fire or electric shock.
Do not unplug or plug in the AC adapter with the instrument's power switch set to ON. Doing so may cause
malfunction.
Connecting Procedure
1
. Make sure that the power switches of both CF-
300 and host PC are set to OFF ("  ").
2
. Insert the output plug of the AC adapter into
the AC adapter input socket on the rear of the
CF-300.
3
. Insert the input plug of the AC adapter into an
AC wall outlet.
{ The AC Adapter AC-A308 supplied as the standard
accessory must be used.
{ Before disconnecting the AC adapter, the power
switch must be set to OFF ("  ").
14