Connecting The Ac Adapter - Konica Minolta CHROMA METER Instruction Manual

Connecting the AC Adapter

You can use either of the optional AC adapter or two commercially-available AA batteries to
supply power to the instrument. Select whichever way is most convenient according to
your application.
WARNING
For the AC adapter, only use the optional AC adapter specified by KONICA MINOLTA
(AC-A305J/L/M) and connect it to an indoor AC outlet of the rated voltage and
frequency (100-240 VAC
used, it may result in the damage to the instrument or AC adapter or a fire or an
electric shock.
If the instrument will not be used for a long time, disconnect the AC adapter from the
AC outlet. Accumulated dirt or water on the prongs of the AC adapter's plug may
cause a fire and should be removed.
Do not insert or disconnect the AC adapter with wet hands. Doing so may cause an
electric shock.
Do not bend the USB cable by force, or twist or pull it. Do not put a heavy object on
the cable and do not damage or modify it. A damaged cable may cause a fire or an
electric shock.
Do not modify or disassemble the instrument or the AC adapter. Doing so may cause a
fire or an electric shock.
Do not continue the use of the instrument and/or AC adapter if they are damaged or if
they produce smoke or odd smells. Doing so may cause a fire. In such situations, turn
the power OFF immediately, disconnect the AC adapter from the AC outlet and/or
remove the batteries, and contact the nearest KONICA MINOLTA-authorized service
facility.
CAUTION
When using the AC adapter, provide an environment such that there is an outlet near
the instrument and the power plug of the AC adapter can be easily plugged or
unplugged.
(Failure to adhere to the following instructions may result in death or serious
injury.)
50/60 Hz). If another AC adapter or different voltage is
(Failure to adhere to the following instructions may result in injury or physical
damage.)
22