Safety Precautions - Konica Minolta CF-300 Instruction Manual

Safety Precautions

To ensure correct use of this instrument, read the following points carefully and adhere to them.
After you have read this manual, keep it in a safe place where it can be referred to anytime a question arises.
WARNING
Do not use the instrument in places where
flammable or combustible gases (gasoline,
etc.) are present.Doing so may cause a fire.
Always use the AC adapter supplied as
a standard accessory or the optional AC
adapter, and connect it to an AC outlet
of the rated voltage and frequency. If an
AC adapter other than those specified by
KONICA MINOLTA is used, it may result in
damage to the unit, fire or electric shock.
If the instrument will not be used for a
long time, disconnect the AC adapter plug
from the AC outlet. Accumulated dirt or
water on the prongs of the AC adapter's plug
may cause a fire and should be removed.
Do not forcibly bend, twist, or pull the AC
adapter power cable. Do not scratch or
alter the power cable or place heavy objects
on it. Doing so may damage the power
cable and cause a fire or electric shock.
Insert the power plug fully and
securely. Incomplete inserting may
cause fire or electric shock.
Do not insert or disconnect the AC adapter
plug from an AC outlet with wet hands.
Doing so may cause electric shock.
CAUTION
Do not perform measurement with the
specimen measuring port
directed towards your eyes.
Doing so may damage your eyes.
Be careful not to pinch hands in parts of
the instrument or accessories that open
and close. Doing so may result in injury.
Do not move the instrument while
looking into the finder. Doing so
may cause the instrument to topple
over or result in other accident.
(Failure to adhere to the following points
may result in death or serious injury.)
Do not disassemble or modify the
instrument or the AC adapter. Doing
so may cause a fire or electric shock.
Take special care not to allow liquid or
metal objects to enter the instrument.
Doing so may cause a fire or electric
shock. Should liquid or metal objects
enter the instrument, turn the power
OFF immediately, disconnect the AC
adapter plug from the AC outlet, and
contact the nearest Konica Minolta-
authorized service facility.
The instrument should not be operated
if it is damaged or the AC adapter is
damaged, or if smoke or odd smells
occur. Doing so may cause a fire. In such
situations, turn the power OFF immediately,
disconnect the AC adapter plug from the
AC outlet and contact the nearest Konica
Minolta-authorized service facility.
Always hold the plug itself when
disconnecting the AC adapter plug from the
AC outlet. Pulling on the power cable may
damage it and cause a fire or electric shock.
Do not look directly into the lamp.
The lamp is very bright, which
may harm your eyes.
(Failing to adhere to the following points may result in
injury or damage to the instrument or other property.)
Make sure that the AC outlet is located
near the instrument and that the AC
adapter plug can be connected to and
disconnected from the AC outlet easily.
When cleaning, disconnect the power plug.
Connecting may cause electric shock.
Do not place the instrument on an
unstable or sloping surface. Doing so
may result in its falling or overturning,
causing injury. Be careful not to drop
the instrument when carrying it.
1