Connecting Ac Adapter; Connection Procedure - Konica Minolta CA-2500 Series Instruction Manual

Connecting AC Adapter

Use accessory AC adapter for power source.
Warning
(Failure to adhere to the following points may result in death or serious injury.)
Always use the AC adapter and power cord supplied as a standard accessory or optional (AC-A312), and
connect it to indoor AC outlet of rated voltage 100-240 V 50/60 Hz. Failure to follow either of these may
result in damage to unit, fire or electric shock.
If this instrument is not used for a long time, disconnect AC adapter from AC outlet. Accumulated dirt or water
on prongs of AC adapter plug may cause fire and should be removed. Be sure to remove before use.
Do not forcibly pull any part on power cord when unplugging since this may cause fire or electric shock.
Gently disconnect by holding plug. Also, do not handle power plug with wet hands. Doing so may cause
electric shock.
Do not forcibly bend, twist or pull power cord. Also, do not place heavy object on power cord, or damage or
modify one. Any of these may cause fire or electric shock due to damage to power cord.
Do not disassemble or modify this instrument or AC adapter. Doing so may cause fire or electric shock.
Should this instrument or AC adapter be damaged or smoke or odd smell be generated, do not keep using
one without correction. Doing so may cause fire. Switch power off immediately, unplug AC adapter from AC
outlet in such case. If operated on battery, remove battery and contact the nearest Konica Minolta-authorized
service facility.
Caution
(Failure to adhere to following points may result in injury or damage to instrument or other property.)
Use this instrument near AC outlet for easy plugging or unplugging in using AC adapter.

Connection procedure

1.
Be sure that power switch is OFF ( [ ]
mark pressed).
2.
Connect AC adapter plug to AC adapter
input terminal of body.
3.
Plug AC adapter to outlet (AC 100-240 V
l Insert AC adapter plug all the way seated in AC outlet.
DC ・ IN
, 50/60 Hz).
18