Table of Contents
Advertisement
Power Source
• Do not short the output plug of the AC adapter. Doing so may result in electric shock or fire.
• The AC adapter is a EMC Class B device. If used in a home environment, it may jam signals used by other appli-
ances. In such case, the user is responsible for taking suitable countermeasures.
• Make sure that the power switch is set to OFF (" I ") when the CF-300 is not in use.
• Always use the AC adapter supplied as a standard accessory (AC-A308) and connect it to an AC outlet of the rated
voltage and frequency.
• Use an AC power supply of the rated supply voltage (within ±10%).
• Do not connect the AC adapter to an overloaded electrical circuit. In addition, do not wrap or cover the AC adapt-
er with cloth or other material while in use. Doing so may cause an electric shock or fire.
• In the event of trouble, unplug the power cord from the input socket of the AC adapter. Moreover, do not install
the instrument in any way that makes it difficult to unplug the power cord from the input socket of the AC adapt-
er in an emergency.
System
• Do not subject the CF-300 to strong impact or vibration. Doing so may cause deterioration of performance or
breakdown.
• The specimen measuring port and integrating sphere of this instrument are important precision parts of the
instrument's optical system, therefore do not dirty or impact them in any way. Moreover, when not using the
instrument, attach the protective cap to prevent dust from penetrating the integrating sphere.
4
Advertisement
Table of Contents
