Changing The Setup - Intermec EasyCoder 601 XP Installation And Operation Manual

Terminal Setup,

Changing the Setup

Intermec EasyCoder 601 XP – Installation & Operation Ed. 3
cont'd.
If you want to set up the printer or use any other of the facilities,
you should answer N (=No) to the "Select Application" prompt.
The following example illustrates how to enter the Setup Mode:
----------------
SHELL
SEL. APPLICATION
----------------
(Y / N / B):N
----------------
SHELL
SETUP
----------------
(Y / N / B):Y
----------------
SETUP:
SER-COM,UART1
From here you can navigate through the Setup Mode by means of
keys on a VT100 terminal according to the same principles as when
using the printer's own keyboard (see overviews in chapter 8):
Key
u
d
e
b
f
x
0 – 9
.
Enter
Backspace Delete one character to the left of the cursor (same
Chapter 9
Action
Move one menu to the left on the same level (same
as <F1>).
Move one menu to the right on the same level (same
as <F2>).
Display error message at test label printing failure
(same as <F3>).
Move up one level or scroll back in a stack of menus
(same as <F4>).
Move down one level or scroll forward in a stack of
options (same as <F5>).
Exit the setup (same as <Setup>).
Enter numeric values.
Specify negative values (same as < . >).
Acknowledge and move to next menu, perform
testfeeds, or print test labels (same as <Enter>).
as <C>).
Intermec Shell Startup Program
75