Changing The Setup - Intermec EasyCoder F2 User Manual

Chapter 8 Intermec Shell Startup Program
Terminal Setup, cont.

Changing the Setup

Key Action
u Move one menu to the left on the same level.
d Move one menu to the right on the same level.
e Display error message at test label printing failure.
b Move up one level or scroll back in a stack of menus.
f Move down one level or scroll forward in a stack of options.
x Exit the setup.
0 – 9 Enter numeric values.
. Specify negative values.
Enter Acknowledge and move to next menu,
perform testfeeds, or print test labels
Backspace Delete one character to the left of the cursor.
68
To set up the printer or use any other of the facilities, answer N
(No) to the "Select Application" prompt. The following example
illustrates how to enter the Setup Mode:
----------------
SHELL
SEL. APPLICATION
----------------
(Y / N / B):N
----------------
SHELL
SETUP
----------------
(Y / N / B):Y
----------------
SETUP:
SER-COM,UART1
From here you can navigate through the Setup Mode using the
keys on a VT100 terminal according to the same principles as
when using the printer's own keyboard (see overviews in Chapter
7):
Intermec EasyCoder F2 – User's Guide
(same as <F1>)
(same as <F2>)
(same as <F3>)
(same as <F4>)
(same as <F5>).
(same as <Setup>)
(same as < . >)
(same as <Enter>)
(same as <C>)