Display Messages At Startup - Intermec EasyCoder 601 XP Installation And Operation Manual

Display Messages
at Startup
Intermec EasyCoder 601 XP – Installation & Operation Ed. 3
When the power is turned on, the printer is initialized. The progress
of the initialization is indicated by an increasing number of dots on
the lower line in the display:
Initializing
:::
The type of startup file running in the printer is indicated by the
message shown in the display window directly after initialization.
A. Intermec Shell Startup Program (standard printers)
ENTER=SHELL
5 sec. v.4.2
4 sec.
3 sec.
Refer to chapter 9 for further information on Intermec Shell. The
digits in the lower right corner of the display indicate the version of
Intermec Shell.
B. Custom-made Application Program (non-standard printers)
Any other display message than those illustrated above indicates
that the printer is running some custom-made, non-standard appli-
cation program or that some error has occurred.
Chapter 4
v.4.2
v.4.2
2 sec. v.4.2
1 sec.
Starting Up
v.4.2
26