Using The Oven For The First Time - Fisher & Paykel OR30SDPWGX1 Instructions Manual

The first time the oven is used or after a black-out the programmer must be started by
pressing keys
and
simultaneously. See the section on the use of the electronic programmer.

Using the Oven for the First Time

• Put in the shelf and the tray.
• Switch the oven on empty (on a cooking function – NOT SELF CLEANING) at maximum power for about 2
hours to remove traces of grease and smells from the components.
• When the oven has cooled down and unplugging the cooker, clean the inside of the oven with a cloth soaked in
water and neutral detergent and dry it perfectly.
The door is hot, use the handle.
◦ The oven door becomes very hot during operation. Keep children away.
◦ The oven shall be always used with the door closed.
◦ NEVER USE THE COOKER WHEN THE OVEN IS OPERATING IN SELF CLEANING MODE.
◦ DO NOT OPERATE THE TOP BURNERS.
◦ WHEN THE SELF CLEANING MODE HAS BEEN COMPLETED: Do not immediately start a
◦ DON'T OPERATE THE WARMING DRAWER DURING THE SELF-CLEANING CYCLE. If during
https://producthelp.fisherpaykel.com/us/Cook/Ranges/Dual_Fuel/OR30SDPWGX1/User_Guide_OR30SDPWGX1/06_how_to...
new self cleaning cycle. LET THE COOKER TO COOL DOWN.
self-cleaning cycle the warming drawer control dial has been turned ON re- turn the dial to the
OFF position. Otherwise at the end of the self-cleaning cycle and after having turned the oven
selector control dial to the
Updated: Sat, 15 Jan 2022 21:49:42 GMT
Powered by
2