Fisher & Paykel OR30SDPWGX1 Instructions Manual page 13

https://producthelp.fisherpaykel.com/us/Cook/Ranges/Dual_Fuel/OR30SDPWGX1/User_Guide_OR30SDPWGX1/06_how_to...
How to Start the Self Cleaning Cycle
The self cleaning cycle must
only be performed with the
oven empty; so, before
starting the cycle take all the
accessories (shelves, drip
tray, ...) out of the oven cavity
and dry any traces of
overflowed liquid.
Do not use any de-greasing
products (e.g. de-greasing
sprays, detergents, etc.).
1. Close the oven door (if it is open or not closed
properly, "door" flashing on the display, the self
cleaning cycle will not start).
2. Turn the oven selector dial to the self cleaning
position
; "P1:30" (self cleaning time, 1 hour and 30
minutes) appears on the electronic programmer
display with the letter "P" flashing.
3. To increase the self cleaning cycle time (max 3
hours) press
of the programmer then
. To go backwards to the minimum of 1 hour
and 30 minutes press
then
. Alternatively press
Updated: Sat, 15 Jan 2022 21:49:42 GMT
Powered by
13