Using Your Oven For The First Time - Fisher & Paykel OR90SDBSI Installation Instructions And User Manual

Using your oven for the fi rst time
14
2
1
Control buttons
1
Clock display
2
Function dial
3
Temperature dial
4
Front left zone
5
Rear left zone
6
Before using your new oven, please:
Read this user guide, taking special note of the 'Safety and warnings' section.
1
Remove all accessories and packaging. Peel the protective film off all surfaces and accessories.
2
Set the clock. The oven will not work until the clock has been set.
3
If your model has sliding shelf supports, check that these are fitted. If they aren't, see 'Care and
4
cleaning' for instructions.
Slide in the shelves you will need, making sure that:
5
they are between the two wires of a shelf position;
the stop notches point down;
the guard rail is at the back.
Note: the grill tray should be positioned between
the two wires of a shelf position and orientated
as shown.
Heat the oven on maximum for:
6
60 minutes in the
30 minutes in the
15 minutes in the
There will be a distinctive smell while you are
conditioning your oven. This is normal, but make
sure your kitchen is well ventilated during the conditioning.
Once cooled, wipe out the oven with a damp cloth and mild detergent, and dry thoroughly.
7
10 11
3 4
position
position
position
5 6 7
Rear right zone
7
Front right zone
8
Rotisserie dial
9
Function indicator light
10
Temperature indicator light
11
Guard rail
8 9
Fig. 14 Control panel
Stop notch
Stop
notch
(NZ AU models only)
Fig. 15 Correct position of shelves
and grill tray