Fisher & Paykel OR30SDPWGX1 Instructions Manual page 19

Abnormal Situations and/or Operation
Problems (During Cooking or the Self
Cleaning Cycle)
1. "F000" or "F001" Appear during Cooking
or Self Cleaning Cycle
Oven temperature sensor is broken or not working
properly. The cooling fan stays on and if the self
cleaning cycle is in progress the door remains locked.
What to do:
Turn the function selector to OFF (oven OFF).
Wait for the oven to cool down completely and
disconnect the cooker from the mains.
Reconnect the appliance to the main.
If after this procedure the display still reads "F000" or
"F001":
Disconnect the cooker from the mains.
Call Customer Care. The cooker must not be used.
2. "F0E0" and "A" Appear during the Self
Cleaning Cycle
This indicates a temperature sensor measurement error
during the self cleaning cycle. This may be due to the
self cleaning cycle being stopped and started again
when it was quite a way through.
What to do:
Turn the oven selector dial to OFF (oven OFF).
Wait for at least 30 minutes before repeating the
operations to start the self cleaning cycle.
If the message is still given after several attempts call
Customer Care.
https://producthelp.fisherpaykel.com/us/Cook/Ranges/Dual_Fuel/OR30SDPWGX1/User_Guide_OR30SDPWGX1/06_how_to...
Updated: Sat, 15 Jan 2022 21:49:42 GMT
Powered by
19