Fisher & Paykel OR30SDPWGX1 Instructions Manual page 15

perfectly closed. Or the door has been opened before
the cycle has been started with confirmation from
What to do:
Close the door and repeat the operations to start the
cycle.
2. "F0E0" and "A" Appear on the
Programmer Display
The self cleaning cycle has been stopped and then re-
started (immediately).
The message is displayed after about 15 minutes and
the self cleaning cycle is zeroed.
What to do:
Turn the oven selector dial to OFF (oven off).
Wait for at least 30 minutes.
Repeat the operations to start the self cleaning cycle.
If after several attempts the message continues contact
the Service Centre.
It is advisable not to stop the
self cleaning cycle and then
start it again when it is quite a
way through.
3. "Fdor" appears on the programmer
display
Malfunctioning of the door lock system.
What to do:
• Turn the function selector to OFF (oven OFF).
• Wait for the oven to cool down completely and
disconnect the cooker from the mains.
• Reconnect the appliance to the main.
If after this procedure the display still reads
"Fdor":
https://producthelp.fisherpaykel.com/us/Cook/Ranges/Dual_Fuel/OR30SDPWGX1/User_Guide_OR30SDPWGX1/06_how_to...
Updated: Sat, 15 Jan 2022 21:49:42 GMT
Powered by
15