Print Server Edit; Syslog Server Screen - ZyXEL Communications NAS326-2T User Manual

The following table describes the labels in this screen.
Table 101 Control Panel > Service > Print Server
LABEL
Edit
Delete
Cancel Job
Refresh
Status
Name

10.9.1 Print Server Edit

Click Control Panel > Service > Print Server and a printer's Edit icon to open the following screen. Use this
screen to change the name the NAS uses for the printer.
Figure 140 Control Panel > Service > Print Server > Edit
The following table describes the labels in this screen.
Table 102 Control Panel > Service > Print Server > Edit
LABEL
Name
Apply
Cancel

10.10 Syslog Server Screen

Use this screen to configure the NAS to accept syslog logs from syslog clients such as Zyxel's G-4100 v2.
Chapter 10 Control Panel: Service
DESCRIPTION
Select a printer and click this to change the name the NAS uses for the printer.
Select a printer and click this to remove a printer from the NAS's printer list. To add the printer back
into the list, disconnect the printer from the NAS's USB port and reconnect it. If that does not work,
disconnect the USB port and turn off the printer's power. Then reconnect the printer and turn it back
on.
Select a printer and click this to remove all print jobs from the NAS queue for a particular printer.
However, since the NAS sends print jobs to the printer as soon as it can, this button may only have an
effect if there are very large or many print jobs in the queue. To stop a print job that has already
started, you may have to turn off the printer.
Click this to update the list of printers and print jobs.
The table lists printers and their queued print jobs. Click a column's heading to sort the entries by that
criteria.
This fields shows whether the printer is connected and turned on (on-line) or not (off-line).
This identifies the printer. Each printer connected to the NAS must use a unique name.
DESCRIPTION
Type a new name to identify the printer. The name must be unique from all the other names of printers
connected to the NAS.
Click this to save your changes.
Click this to return to the previous screen without saving.
NAS Series User's Guide
172