How To Configure Web Publishing - ZyXEL Communications NAS326-2T User Manual

Figure 135 Control Panel > Service > Web Publishing > Share Publish
The following table describes the labels in this screen.
Table 100 Control Panel > Service > Web Publishing > Share Publish
LABEL
Publish
Share Name
Path
Apply
Reset

10.8.3 How to Configure Web Publishing

This example covers how to configure the Web Publishing screen to let people use a web browser to
access a share named FamilyPhotos (created using the Control Panel > Privilege and Sharing > Shared
Folders screen) without logging into the Web Configurator and shows how to access the share through
the Internet.
Click Control Panel > Service > Web Publishing and configure the screen as shown (enable the web
1
publishing in the Web Publishing > Status screen and select FamilyPhotos to publish in the Web Publishing
> Share Publish screen) and click Apply.
Chapter 10 Control Panel: Service
DESCRIPTION
Select the share(s) to publish for web browser access. People can access files in the
published shares using a web browser, without logging into the Web Configurator.
This displays the name of the share created on the NAS.
After you select a share and click Apply, this displays the web address that you can enter in
your browser's address bar to access the published share's web page. It contains the NAS's
IP address, a port number for accessing the published share websites hosted on the NAS,
and the name of the web-published share.
Note: By default, the web-published shares use port 5000 for HTTP and 5001 for
HTTPS.
Click this to save your changes.
Click this to restore your previously saved settings.
NAS Series User's Guide
169