Create A New Lun - ZyXEL Communications NAS326-2T User Manual

Table 37 Storage Manager > iSCSI > iSCSI LUNs (continued)
LABEL
Delete
Info

5.4.1 Create a New LUN

A LUN is a unit of storage shared over iSCSI that can be mapped to an iSCSI target. You must create an
iSCSI LUN volume before you configure an iSCSI target for it. Click Create in the iSCSI LUNs section of the
Storage Manager > iSCSI screen to open the screens as shown.
Chapter 5 Storage Manager
DESCRIPTION
Click this to open the following screen where you can delete an existing LUN.
Key in DELETE and click Delete to remove an existing LUN. Click Cancel to close this screen.
Click this item to check detailed information about the LUN.
Name - Displays the name of the LUN.
Location - Displays the name of the volume the LUN is located in.
Capacity - Displays the size of the LUN.
Allocation mode - Displays the allocation method the LUN applies.
Write Back - Displays whether the write back feature is enabled or disabled.
Mapped iSCSI Target - Displays the iSCSI target name the LUN is mapped to.
NAS Series User's Guide
82