Network - ZyXEL Communications NAS326-2T User Manual

Table 114 Status Center > System Information (continued)
LABEL
Firmware Version
MAC Address
CPU
Memory
Process Name
CPU Usage
Memory Usage
UPS
Fan Speed
CPU Temperature

12.1.2 Network

The Network screen display the NAS connection status. From the Status Center screen, click Network to
open the screen as shown.
Figure 155 Status Center > Network
Chapter 12 Status Center
DESCRIPTION
This is the NAS firmware version.
This displays the NAS's unique physical hardware address (MAC) for the LAN Ethernet port.
You need the MAC address to register the product at myZyxel.com. Customer support
may also request it for troubleshooting purposes.
This displays a summary of CPU usage by all current processes.
Note: If too many users are using the NAS then the NAS may appear sluggish.
This shows how much of the NAS's total memory is being used.
This displays the top 10 processes that occupy the most CPU usage.
This displays a summary of CPU usage by all current processes.
This shows how much of the NAS's total memory is being used.
This shows the Uninterruptible Power Supply (UPS) capacity.
This is the RPM (Rotations Per Minute) of the NAS's fans.
This displays the temperature near the NAS's CPU. The NAS generates an emergency log if
the temperature goes out of the normal operating range. If the temperature goes even
higher, the NAS shuts down automatically to avoid damage from overheating. If the NAS
overheats, make sure the fans are working and it is in a well ventilated place.
NAS Series User's Guide
197