Figure 107 Control Panel > Network > TCP/IP > Network Diagnosis
The following table describes the labels in this screen.
Table 81 Control Panel > Network > TCP/IP > Network Diagnosis
LABEL
Host
Ping
Result
8.5 UPnP Port Mapping Screens
Use UPnP (Universal Plug and Play) port mapping to allow access from the WAN to services you select on
the NAS. It is recommended that you place the NAS behind an Internet gateway firewall device to
protect the NAS from attacks from the Internet. Many such Internet gateways use UPnP to simplify peer-
to-peer network connectivity between devices. UPnP can automatically configure the Internet
gateway's firewall and Network Address Translation (NAT) to allow access to the NAS from the Internet.
Figure 108 UPnP for FTP Access
192.168.1.20
Chapter 8 Control Panel: Network
DESCRIPTION
Select a specific host to perform the diagnosis.
Click this to test the network connection.
Displays whether or not the test received a response from the host.
a.b.c.d
TCP: 21
NAS Series User's Guide
138
TCP: 21