Dydns Screen - ZyXEL Communications NAS326-2T User Manual

Figure 113 Control Panel > Network > Terminal
The following table describes the labels in this screen.
Table 84 Control Panel > Network > Terminal
LABEL
Enable Telnet
Service
Enable SSH Service Select this to enable SSH access to the NAS. Clear it to not allow SSH access to the NAS.
Apply
Reset

8.7 DyDNS Screen

Use this screen to enable and configure Dynamic DNS.
Dynamic DNS (DyDNS) allows you to update your current dynamic IP address with a dynamic DNS
service so that anyone can contact you (such as through NetMeeting or CUSeeMe). You can also
access your FTP server or Web site on your own computer using a domain name (for instance
myhost.dhs.org, where myhost is a name of your choice) that will never change instead of using an IP
address that changes each time you reconnect. Your friends or relatives will always be able to call you
even if they don't know your IP address.
Click Control Panel > Network > DyDNS to open the following screen.
Chapter 8 Control Panel: Network
DESCRIPTION
Select this to enable Telnet access to the NAS. Clear it to not allow Telnet access to the NAS.
To use Telnet, log in as "admin" or "root" and use the admin password.
To use SSH, log in as "admin" or "root" and use the admin password.
Click this to save your changes.
Click this to restore previously saved settings.
NAS Series User's Guide
145