Manual Firmware Upgrade - ZyXEL Communications NAS326-2T User Manual

Figure 118 Control Panel > System > FW Upgrade > Latest Firmware Check
The following table describes the labels in this screen.
Table 89 Control Panel > System > FW Upgrade > Latest Firmware Check
LABEL
Model Name
Current Firmware
Version
Last Check
Check Now
Periodically Check for
Latest Firmware
Automatically
Status
Upgrade Now
Reset

9.6.2 Manual Firmware Upgrade

You can also download the firmware from the Zyxel website and upgrade the firmware manually. Click
Control Panel > System > FW Upgrade > Manual Firmware Upgrade to show the following screen.
Chapter 9 Control Panel: System
DESCRIPTION
Displays the model name of you NAS
Displays the current firmware version of your NAS
Displays the last checking time. If no, it is blank.
Click this to check Zyxel's server for updated firmware.
Select this to have the NAS regularly check Zyxel's server for updated firmware. The NAS
notifies you at login if a new firmware is available.
Click Apply to save this field's setting.
Displays the firmware checking status or error messages. If there is no previous checking
information, it displays --.
Click this to upload the new firmware. The NAS automatically restarts after you upgrade.
Wait until the restart completes before accessing the NAS again. If you interrupt the
upgrade, then the NAS may become unusable. See
model's LED behavior during firmware upgrade.
Click this to refresh the screen.
NAS Series User's Guide
152
Section 1.2 on page 14 for your