Figure 150 Control Panel > Service > Maintenance > Log > Report Config: Syslog Server Setting
The following table describes the labels in this screen.
Table 110 Control Panel > Service > Maintenance > Log > Report Config: Syslog Server Setting
LABEL
Enable Syslog
Server
Server Address
Syslog
Apply
Cancel
11.5 Configuration Backup Screens
Use these screens to backup or restore the NAS configuration settings. You can also reset your device
settings back to the factory default.
11.5.1 Configuration Backup
Click Control Panel > Service > Maintenance > Configuration Backup to open the following screen.
Click Backup to save the current configuration of the NAS to your computer. A pop-up screen appears
asking you to confirm.
Chapter 11 Control Panel: Maintenance
DESCRIPTION
Check this to enable syslog server.
Enter the syslog server address you want the NAS to use for its log alerts.
Select the type of log alerts you want to receive in your e-mail. Select All Logs to include all
types of log alerts.
Click this to save your changes.
Click this to return to the previous screen without saving.
NAS Series User's Guide
185