Align End Frames - Hussmann FG Installation And Service Manual

I
1-6
NSTALLATION
On wide islands, apply
the 1 in. (25 mm) gasket
at the top of return air
flues as shown. Apply the
5
/
1 in. (41 mm) gasket at
8
the top of the discharge
(center) flue as shown.
Note: When adding an
end case, apply gaskets to
the wide island to be
joined.

Align End Frames

N
OTE THAT ALIGNMENT ORDER IS DIFFERENT FROM
! R
TIGHTENING ORDER EFER TO THE ILLUSTRATION
NOTE: Cases must be level before joining.
1. Remove any factory-installed fasteners.
2. Move the second case as close to the first as
possible by pushing or using lever bar (mule).
3. Fastener size and location are detailed in
Pages 1-8 and 1-9. Loosely assemble bolt,
washers, lockwasher and nut as shown on
Page 1-7.
Do not attempt to draw cases together using
nut and bolt.
P/N 0467434_D
FW
5 1
1 / x
8
1
1 x / Foam Gasket
2
.
/ Foam Gasket
2
.
WWW HUSSMANN
.
COM