Table of Contents
Advertisement
I
1-10
nstallatIon
Align End Frames
imporTanT:
alignmenT order is
differenT from TighTening order
r
efer To The illusTraTion
NOTE: Merchandisers must be level before
joining.
1. Remove factory-installed nut retainers
from lower front end frame(s).
2. Move the second case as close to the first
as possible by pushing or using lever bar
(mule).
3. Match alignment pins with corresponding
holes in foam bottom and canopy.
4. Verify that front panels match. Adjust
shims as necessary until merchandisers in the
lineup display a good fit and finish.
P/N 0515388_L
!
.
U.S. & Canada 1-800-922-1919 • Mexico 01-800-890-2900 • www.hussmann.com
IMPORTANT:
A
lignment order is different
from tightening order
R
efeR to alignment diagRam
and detail views on the next
.
page
!
Advertisement
Table of Contents
