Install Fasteners; Joining End Case To Wide Island - Hussmann FG Installation And Service Manual

P/N 0467434_D
Install Fasteners (Parent to Parent)
Metal
Washer
Bolt
NOTE: Joining hardware is shown enlarged for clarity.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Case
End
Frames
Metal
Washer
Lock
Washer
Clip Location
Between
Two Cases

Joining End Case to Wide Island

1. Remove nuts and washers from outside of
end case
2. Apply gaskets to wide island.
3. Move end as close to the wide island as pos-
sible by using lever bar (mule). Take care not to
damage adjustable legs.
Nut
4. Align End Case with Wide Island Frame.
5. Fastener size and location are detailed in the
following pages. Loosely assemble bolt,
washers, lockwasher and nut as shown below.
X and W ONLY
Lock
Washer
Bolt
Used in Positions
Y, V, X and W
Parent End
Metal
Case Case
Washer
End Back
Used in
Frame Wall
Positions
Foam
Assembly
Low Temperature
1-7
Flanged
Nut
(Factory
Installed)
Behind
Louver
Excel