Installing The Accessories (Tape Guide Base, Tension Roller And Suction Pipe) Supplied With The Machine - JUKI MF-7900 Series Engineer's Manual
High-speed, cylinder-bed top and bottom coverstitch machine
Hide thumbs
Also See for MF-7900 Series:
- Instruction manual (30 pages) ,
- Specification (8 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
(10) Installing the accessories (tape guide base, tension roller and suction
pipe) supplied with the machine
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
❸
❶
❷
1. Installing the guide roller
(1) Adjust presser guide (asm.) ❸ to the installing
hole, and fix it with screws ❶ and ❷ .
❷
2. Installing the bottom roller of the tension roller
(1) Install bottom roller plate ❶ with three wood
❶
screws ❷ .
(Reference) For the installing position of the
❷
3. Installing the front roller
❶
(1) Fix front roller (general asm.) ❶ with setscrew
❷ .
– 133 –
bottom roller plate ❶ , refer to the
drawing of the table.
Advertisement
Table of Contents
