Table of Contents
Advertisement
10. INSTALLING THE ACCESSORIES (TAPE GUIDE BASE, TENTION ROLLER AND
SUCTION PIPE) SUPPLIED WITH THE MACHINE
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.
(1) Installing the guide roller
❸
❶
(2) Installing the bottom roller of the tension roller
(3) Installing the front roller
❷
1) Adjust presser guide asm. ❸ to the installing hole, and
❷
1) Install bottom roller plate ❶ with three wood screws ❷ .
❶
❷
Fix front roller general asm. ❶ with setscrew ❷ .
❶
– 6 –
fix it with screws ❶ and ❷ .
For the installing position of the bottom roll-
er plate, refer to the drawing of the table.
Advertisement
Table of Contents
