Adjusting And Setting Sc-921 - JUKI MF-7900 Series Engineer's Manual

(2) Adjusting and setting SC-921

1) When SC-921 is used, refer to the instruction manual of SC-921, and assemble the product.
2) Setting procedure of the machine head
(Caution) For the operation panel other than CP-18, refer to the Instruction Manual for the operation
panel to be used for the setting procedure of the machine head.
❸ ❹
❸ ❹
❸ ❹
❺
❻
❺ ❻
❺
❻
– 63 –
1. Refer to the Engineer's Manual of SC-
920/SC-921, "5.-(9) SC- 921 Func-
tion setting" and call up the function
setting No. 95.
2. The type of machine head can be se-
lected by pressing
switch ❻ ).
* In regard to the type of the machine
head, refer to "5.-(2)-3) Machine head
list" in the separate paper.
3. After selecting the type of machine
head, by pressing
switch ❹ ), the step proceeds to 96
or 94, and the display automatically
changes to the contents of the setting
corresponding with the type of ma-
chine head.
switch ❺ (
switch ❸ (