(12) U11-UT59 semi-submerged type for the direct-drive type
A
D
E
A 4×ø3.4 drilled hole on the bottom surface, depth 20 (Drill a hole at the time of set-up.)
B ø17 drilled hole
C 2×ø3.4 drilled hole on the bottom surface, depth 10 (Drill a hole at the time of set-up.)
D Installing position of drawer stopper (on the bottom surface)
E JUKI logo type
F 4×ø10.5 drilled hole, ø26 spot facing, depth 3.5
– 200 –
F
Detail drawing of measure (2:1)
B
C
Type: Helvetica Reg Condensed
Condensed voided letters
Thickness 1.5
Thickness 0.8
Thickness 0.5
Thickness 1.5
Z-Z (4 locations)
Part No. : 70004269