Table of Contents
Advertisement
Chapter 3 Operation
Selecting a Submenu
To select a submenu, perform the following steps:
1. Follow the same steps used to select a main menu.
2. Use the front panel
1)NETWORK (NI)
3. Press
.
E
NTER
The unit responds by displaying the first two available data field items. The cursor is on the number of the
first item. When there are more than two data field items for the selected submenu, a down arrow is visible
on the lower right corner.
Setting Data Fields
Data fields that are available for editing are preceded by a colon (:). For this example, set the
1. Follow this path:
2. Press
while the cursor is located on
E
NTER
(to the right of the submenu item name).
You can now use the
field position one at a time.
3. When the appropriate value is in the data field position, press
The unit is set for the value shown in the data field and the cursor moves back to the submenu item
position indicating the operation is complete. You can select another submenu field or press
to return to the submenu.
CEL
C
ANCEL
making a data change, the original data value is restored and the cursor returns to the
submenu field.
Viewing Display-Only Data Fields
To view an example of a
1. Select
from the main menu.
S
TATUS
2. Select submenu
LOSS OF SIGNAL INACTIVE/ACTIVE
Exiting Any Menu Field Operation or Display
1. Press
as many times as required to return to a menu level.
C
ANCEL
32
and
arrows to place the cursor on a menu; in this example,
U
D
P
OWN
.
Use the front panel
2) CONFIG > 1)NETWORK (NI) > 1)FORMAT:
and
arrows to scan the available settings, which display in the data
U
D
P
OWN
is available any time during the operation. If used prior to pressing Enter after
data field, navigate through the following menus:
D
O
ISPLAY
NLY
.
CURR ERR/ALM
© 2003 ADTRAN, Inc.
arrow to access these.
D
OWN
. The cursor moves to the current data field
1)FORMAT:
E
is displayed giving the current state of the alarm.
TSU LT User Manual
F
ORMAT
to set the value.
NTER
61203060L1-1A
type.
C
-
AN
Advertisement
Table of Contents
