Installing The 12-V Battery; Charging The 12-V Battery - Husqvarna TX 300i 2021 Owner's Manual

14 ELECTRICAL SYSTEM
14.2
14.3
98

Installing the 12-V battery

H02650-10

Charging the 12-V battery

Warning
Risk of injury 12 V batteries contain harmful substances.
–
Keep 12 V batteries out of the reach of children.
–
Keep sparks and open flames away from 12 V batteries.
–
Only charge 12 V batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging 12 V batteries.
Minimum clearance
–
Do not charge deeply discharged 12 V batteries if the charge is already below the minimum voltage.
Minimum voltage before the start of the charge
–
Dispose of 12 V batteries with less than the minimum voltage correctly.
Note
Environmental hazard 12 V batteries contain environmentally hazardous materials.
–
Do not dispose of 12 V batteries as household waste.
–
Dispose of 12 V batteries at a collection point for used batteries.
Main work
–
Position the 12-V battery in the battery compartment with
the terminals facing forward, and secure with holding
1
bracket .
12-V battery (HJTZ5S-FP-C) (
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
A
Contact disks must be mounted under screws
4
cable sockets with the claws toward the battery termi-
nal.
–
5
Connect positive cable
Guideline
Screw, battery termi-
nal
–
Slide positive terminal cover
–
7
Connect negative cable
Guideline
Screw, battery termi-
nal
Finishing work
–
Mount the seat. ( p. 62)
–
Install the air filter box cover. (
1 m (3 ft)
9 V
p. 134)
2
.
M6 10 Nm (7.4 lbf ft)
3
to the 12-V battery.
M5 2.5 Nm (1.84 lbf ft)
6
over the positive terminal.
to the 12-V battery.
M5 2.5 Nm (1.84 lbf ft)
p. 62)
and