Modifying Match Patterns; Deleting Match Patterns - Cisco PXM Version 1.1 User Manual

Chapter4 CSR GUI Functionalities

Modifying Match Patterns

Step 1
In the Active Dataset tab in the CSR window, click the down arrow in the Selection box, then select
Match Patterns from the pull-down menu.
Step 2
In the Match Pattern area, select a pattern by double-clicking on that pattern. Match Pattern information
similar to the following appears (
Figure4-31 Dialog Box for New Match Pattern in Active Dataset
Step 3
Change the information accordingly.
Step 4
Click Modify to save the changes, or click Cancel to leave the changes.

Deleting Match Patterns

Step 1
In the Active Dataset tab in the CSR window, click the down arrow in the Selection box, then select
Match Patterns from the pull-down menu.
Step 2
In the Match Pattern area, select a pattern. You can select more than one pattern by holding down the
Ctrl key while clicking each pattern.
Step 3
Click Delete
Step 4
Click Yes to delete the pattern, or click No to stop the deletion.
Note
Figure4-31 " Dialog Box for New Match Pattern in Active
.
A Delete message appears.
Alternatively, you can delete a pattern by clicking Delete when you are in the dialog box for
modifying the pattern.
Updating Active Datasets
Cisco Carrier Sensitive Routing User Guide
Dataset"):
4-31