Sending Test Route Request Commands To An Active Csr Application; Step - Cisco PXM Version 1.1 User Manual

CSR Commands

Sending Test Route Request Commands to an Active CSR Application

Step 1

Click the CSR Commands tab in the CSR window. The following screen appears (
in CSR Window, page
Figure4-39 CSR Commands Tab in CSR Window
Step 2
In the ANI box, enter the origination pattern.
Step 3
In the DNIS box, enter the pattern dialed.
Step 4
In the Source Carrier Id box, enter the ingress carrier to be used for testing.
Step 5
In the Destination Carrier Id box, enter the test egress carrier.
Cisco Carrier Sensitive Routing User Guide
4-42
4-42):
Chapter4 CSR GUI Functionalities
CSR Commands Tab