Deleting Carriers - Cisco PXM Version 1.1 User Manual

Updating Active Datasets
Figure4-19 Dialog Box for an Existing Carrier in Active Dataset
Step 3
Change the information accordingly.
Step 4
Click Modify to save the changes, or click Cancel to cancel the changes.

Deleting Carriers

Step 1
In the Active Dataset tab in the CSR window, if Carriers is not selected in the Selection box, click the
down arrow in that box, then select Carrier from the pull-down menu.
Step 2
In the Carriers area, click a carrier. You can select more than one carrier by holding down the Ctrl key
while clicking each carrier.
Step 3
Click Delete. The following message appears (
Figure4-20 Delete Carrier Message in Active Dataset
Step 4
Click Yes to delete the carrier, or click No to stop deletion.
Cisco Carrier Sensitive Routing User Guide
4-16
Figure4-20 "Delete Carrier Message in Active Dataset
Chapter4 CSR GUI Functionalities
"):