Step 6 - Cisco PXM Version 1.1 User Manual

Chapter4 CSR GUI Functionalities
Note

Step 6

In the Time box, enter the simulated time to test time-sensitive calls. If this is not specified, the current
time is used. The format and an example for time entry are shown below:
hour(0-23):min (0-60):sec (0-60)
This entry is optional.
Step 7
In the Date box, enter the simulated date to test date-sensitive and time-sensitive calls.
If this is not specified, the current date is used. Format and example for date entry are:
4 digit year-2 digit month-2 digit day
Step 8
Click the button to the left of Active or Inactive for the provisioned dataset for running the test. This
dataset is stored in the CSR database. The current dataset in CSR memory is not used.
Step 9
Click Send Test to CSR to send the request to the CSR for processing. Test results are automatically
displayed at end of test. They are stored in the database for later retrieval.
Step 10
To display test results as needed, click Show Test Results. The test results appears (
Results Generated by the CSR Commands
unselected carriers.
Figure4-40 Test Results Generated by the CSR Commands Tab
If an egress carrier is specified, the call is ignored. It is assumed that the egress carrier has
been found.
for time, as in 12:59:10
for date, as in 2002-12-03
Tab"). The list usually contains selected carriers followed by
Cisco Carrier Sensitive Routing User Guide
CSR Commands
Figure4-40 "Test
4-43