CSR GUI Functionalities
This chapter describes CSR functionalities and commands, and contains the following sections:
•
•
•
•
•
•
Activating the GUI
Step 1
To start the GUI, enter the following command at the system prompt:
/usr/local/csr/gui/csrgui &
The Login dialog box appears in
Figure4-1
Activating the GUI, page 4-1
Configuring CSR with the GUI, page 4-2
Updating Active Datasets, page 4-12
Updating Inactive Datasets, page 4-39
CSR Commands, page 4-41
Multiple GUI Operation, page 4-46
Login Dialog Box
Figure4-1 " Login Dialog
Box", as shown below:
Cisco Carrier Sensitive Routing User Guide
C H A P T E R
4
4-1