Creating Carriers - Cisco PXM Version 1.1 User Manual

Updating Active Datasets

Creating Carriers

Note
Step 1
In the Active Dataset screen in the CSR window, if Carriers is not selected in the Selection box, click
the down arrow in that box. A pull-down menu appears
Dataset"):
Figure4-17 Carrier Selection Box in Active Dataset
Step 2
Select Carriers from the pull-down menu, then click New. The New Carrier dialog box appears
(Figure4-18 "Dialog Box for New Carrier in Active Dataset
Cisco Carrier Sensitive Routing User Guide
4-14
At least one contact list must be created before a carrier can be created. There must be a
single carrier of "Home" type created for the provisioned data. See the
Lists " section on page4-21.
Chapter4 CSR GUI Functionalities
"Deleting Contact
(Figure4-17 "Carrier Selection Box in Active
"):