Omron FH Series Construction Manual page 54

Register it as a model by
clicking [OK] after fitting the
registering
calibration target.
Click [Edit] on the [Region
setting] tab
measurement region according
to the field of view for a camera
to use. Click [OK] after setting.
Click [Measurement] on the
[Measurement] tab and check
that the "Count" becomes one.
* If it does not become one, the
settings are
Therefore execute the model
registration again.
Click the "3. Vision Master
Calibration" icon on the Main
Window of the Vision Sensor to
open the setting screen.
Select the [Sampling setting]
tab and set "First calibration
6
setting", "Effective
view", "Translation
setting", "Detection
number" according
actual environment.
figure on the
to set the
not proper.
field of
sampling
point
to the
50