Installing The Water Pump Cover; Installing The Starter Drive - Husqvarna FE 250 EU 2014 Repair Manual

ENGINE
18
18.5.18

Installing the water pump cover

Installing the starter drive

18.5.19
-
Mount all screws and tighten in a crisscross pattern.
-
Mount the two-part water pump impeller
Mount and tighten nut@.
Guideline
Nut, water-pump wheel
-
Mount the water pump cover with the seal ring.
• Info
I
Ensure that the dowel pins are seated properly.
8
-
Mount screw with the seal ring b ut to not tighten yet.
Guideline
I
Screw, water pump cover
- C,
Mount screw b ut do not tighten yet.
Guideline
I
Screw, water pump cover
-
Mount and tighten screws
Guideline
I
Screw, water pump cover
- 4D
Tighten screws and
Guideline
I
Screw, water pump cover
Position freewheel gear
-
Mount the starter idler gear with the washer.
-
Mount lock ring@.
O.
5Nm
M6
(3.7 lbf ft)
I
M6x25
I
M6x25
0.
I
M6x40
C,.
I
M6x25
O.
182
Loctite ® 243 ™
10 Nm (7.4 lbfft)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbfft)
1 10 Nm (7.4 lbfft)