Adding Engine Oil; Checking The Engine Oil Pressure - Husqvarna FE 250 EU 2014 Repair Manual

21 LUBRICATION SYSTEM

Adding engine oil

Info
Too little engine oil or poor-quality engine oil results in premature wear of the engine.
21.5
Main work
O
-
Remove oil filler plug
Fill engine oil to the middle
I
Engine oil (SAE 1 0W/50)
• Info
I
For optimal performance of the engine oil, do not mix different types of
engine oil.
We recommended changing the engine oil when necessary.
-
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning
result in unconsciousness and death.
Always make sure there is sufficient ventilation when running the
engine.
-
Use an effective exhaust extraction system when starting or running
the engine in an enclosed space.
-
Start the engine and check that it is oil-tight.
Finishing work
-
Check the engine oil level.
ressure
-
Check the engine oil level.
-
Remove the release screw of the chain adjuster.
-
Mount and tighten special tool
Guideline
I
Oil pressure adapter
I
Oil pressure adapter (77329006000)
-
Connect pressure tester
I
Pressure tester (61029094000) (!!:!Ip. 270)
Danger
Danger of poisoning
result in unconsciousness and death.
-
Always make sure there is sufficient ventilation when running the
engine.
-
Use an effective exhaust extraction system when starting or running
the engine in an enclosed space.
-
Start the engine and let it warm up.
-
Check the engine oil pressure.
Engine oil pressure
Engine oil temperature: 80 °c
(176 °F)
Engine speed: 1,600 rpm
Engine oil temperature: 80 °c
(176 °F)
Engine speed: 6,000 rpm
with the O-ring from the clutch cover.
f)
of the level viewer.
(l!!ll p. 262)
Exhaust gases are toxic and inhaling them may
(l!!ll p. 197)
(l!!ll p. 197)
O.
I
M10x1
(!!:!I p. 273)
8
to the special tool without the T-plate.
Exhaust gases are toxic and inhaling them may
0.9 bar (13 psi)
2.5 bar (36 psi)
200
10 Nm (7.4 lbf ft)