Work On The Clutch Cover - Husqvarna FE 250 EU 2014 Repair Manual

ENGINE
18
18.4.3

Work on the clutch cover

CD
-
Press in shaft seal ring
facing in.
-
Mount and tighten oil nozzle
Guideline
Oil nozzle for clutch lubri-
cation
-
Mount and tighten oil nozzle
Guideline
Oil nozzle, piston cooling
-
Position all bearing locks.
-
Mount and tighten screws (D.
Guideline
Locking screw for bearing
-
Blow out the oil channel with compressed air and check that it is clear.
O.
-
Remove shaft seal ring
8.
-
Remove lock ring
CD.
-
Remove shaft seal ring
8
Press out bearing toward the inside.
of the countershaft so it is flush with the open side
e.
M5 6Nm
(4.4 lbf ft)
0.
M5 2 Nm
(1.5 lbf ft)
M5 6Nm
(4.4 lbf ft)
149
Loctite ® 243 ™
Loctite 243
® ™
Loctite ® 243 ™