ENGINE
18
18.3.27
Removing the spacer
18.3.28
Removing the left section of the engine case
Removing the shift rails
18.3.29
O
-
Remove spacer
of the crankshaft.
O.
-
Remove screws
-
Tilt the left section of the engine case upward and remove the screw connections
of the engine fixing arm.
-
Insert the special tool into the crankshaft.
I
Protection cap (75029090000)
8
Mount special tool
with the appropriate screws.
I
Puller (77229048000)
(a
Info
Use the drill hole marked with 772.
-
Take off the section of the engine case.
Info
•
I
Do not subject the section of the engine case to any stress.
The washer of the main shaft usually adheres to the bearing.
-
Take off the left section of the engine case.
-
Remove the special tool.
O
-
Remove shift rail
together with upper spring
@)
-
Remove shift rail
together with upper spring
(a
p. 271)
p. 272)
8.
C,
and the lower spring.
145