Rj-45 Console Port Signals And Pinouts - Cisco NPE-175 Installation And Configuration Manual

NPE-G2 Memory Information and Specifications
The Cisco 7200 series routers ship with a roll-over cable. Connection to a terminal or a modem requires
an RJ-45-to-DB-25 adapter, and possibly a DB-25-to-DB9 adapter. Refer to
adapter configurations that can be used to connect terminals and modems to the Cisco 7200 series
routers.
Table 6-13
Access Server Port
Console or auxiliary
Console or auxiliary
Auxiliary or console
1. The FDTE RJ-45-to-DB-25 adapter is labeled "Terminal."
2. The MMOD RJ-45-to-DB-25 adapter is labeled "Modem."
The console and auxiliary ports are configured as asynchronous serial ports.
RJ-45 console and auxiliary port connections.
Figure 6-13
4
1
2
3
A cable and adapter kit is available from Cisco (Cisco Product Number ACS-2500ASYN=).
describes the cable and adapter configurations that can be used to connect terminals and modems to the
console or the auxiliary port.

RJ-45 Console Port Signals and Pinouts

The NPE-G2 console port supports Data Carrier Detect (DCD).
signals for the NPE-G2.
Network Processing Engine and Network Services Engine Installation and Configuration
6-22
Asynchronous Device Cabling Options
RJ-45 Cable Type
Roll-over
Straight
Roll-over
Console and Auxiliary Port RJ-45 Connections
1
C O N S O
5
Console port
Auxiliary port
RJ-45 connectors
DB-25 Adapter
FDTE
FDCE
MMOD
2
F E
L IN K
L E
A U X
F E 0 /2 U S B
F O R M A
N A G E M
E N T
U S E O N
LY
3
4
5
Chapter 6
Table 6-13
End Device
1
Terminal
Terminal
2
Modem
Figure 6-13
N E T W O
R K P R O
C E S S IN
U
G E N G IN
S
C O M P A
B
C T F L A
S H
C F
A C T V
Cable to console terminal or DTE
Cable to modem or DCE
Table 6-14 lists the RJ-45 console port
NPE-G2 Overview
for the cable and
shows the
E - G 2
S Y S T
S TA T
P W R
O K
Table 6-12
OL-4448-12