Cisco NPE-175 Installation And Configuration Manual page 146

Using show Commands to Check the Installation
To determine the hardware configuration of your NPE-G1 or NPE-G2, use the show version command.
The following example shows an NPE-G2 installed in a Cisco 7206VXR router:
Router# show version
Cisco IOS Software, 7200 Software (C7200-JS-M), Version 12.4(PC_D.051028) UBUILDIT Image,
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 28-Oct-05 00:30 by biff
(display text omitted)
Cisco 7206VXR (NPE-G2) processor (revision A) with 917504K/131072K bytes of memory.
Processor board ID 32428149
MPC7448 CPU at 1660Mhz, Implementation 0, Rev 2.0
6 slot VXR midplane, Version 2.8
(display text omitted)
Network Processing Engine and Network Services Engine Installation and Configuration
7-60
Chapter 7 NPE-G1 and NPE-G2 Installation and Configuration Information
OL-4448-12