Cisco NPE-175 Installation And Configuration Manual page 111

Chapter 7 NPE-G1 and NPE-G2 Installation and Configuration Information
Figure 7-13
Step 4 Gently insert a DIMM into the DIMM socket.
Push the release latches until they slip into the notch on the edge of the DIMM, holding it securely in
Step 5
place.
You have finished replacing the DIMM. To install the NPE-G2 in the chassis, go to the
NPE-G1 or NPE-G2 into the Router" section on page
OL-4448-12
Installing or Removing the DIMM on the NPE-G2
Network Processing Engine and Network Services Engine Installation and Configuration
Installing the NPE-G1 or NPE-G2
7-28.
"Inserting the
7-25