Cisco NPE-175 Installation And Configuration Manual page 161

Chapter 8 Preparation for Installation
Table 8-5
1
Router Platform
Cisco uBR7200 series
• Cisco uBR7246VXR
• Cisco uBR7246 and
Cisco uBR7223
1. The NPE-300 is not supported in the Cisco 7202, Cisco 7204, or Cisco 7206 routers.
2. Cisco IOS Release 12.1(5)T and later releases of 12.1T require a minimum of 128 MB of SRAM or SDRAM.
3. For information about the Cisco 7206 or Cisco 7206VXR as router shelves in the Cisco AS5800 Universal Access Server, refer to the Cisco AS5800
Universal Access Server documentation listed in the
Table 8-6 Software Requirements for the NPE-175, NPE-225, and NSE-1
Router Platform
Cisco 7200 Series
Cisco 7204VXR and
•
Cisco 7206VXR
OL-4448-12
Software Requirements for the NPE-100, NPE-150, NPE-200, and NPE-300 (continued)
Network Processing Engine
2
NPE-100
—
— Cisco IOS Release 11.3(6)NA
or later releases of 11.3NA
Cisco IOS Release 12.0(6)SC or later releases of
12.0SC
Cisco IOS Release 12.1(3)EC1 or later releases of
12.1EC
Cisco IOS Release 12.2(4)BC1 or later releases of
12.2BC
"Related Documentation" section on page
NPE or NSE
1
NPE-175
Cisco IOS Release 12.0(4)XE or later releases of 12.0XE
Cisco IOS Release 12.0(5)T or later releases of 12.0T
Network Processing Engine and Network Services Engine Installation and Configuration
2
NPE-150 NPE-200
— —
1
NPE-225
Software and Hardware Requirements
2
NPE-300
Cisco IOS Release
12.0(6)SC or later
releases of 12.0SC
Cisco IOS Release
12.1(3)EC1 or later
releases of 12.1 EC
Cisco IOS Release
12.2(4)BC1 or later
releases of 12.2BC
—
iii.
NSE-1
Cisco IOS Release 12.1E or
Cisco IOS Release 12.1(5)T or
later releases of 12.1T
2
8-7