Cisco NPE-175 Installation And Configuration Manual page 159

Chapter 8 Preparation for Installation
Table 8-4
Router Platform
•
•
1. The NPE-G2 has its own Cisco IOS software image with the prefix "c7200p-" in the software images filenames, including
the boot image. The NPE-G2 does not boot up with a software image with the prefix "c7200-". Previous network processing
engines, or the network services engine, do not boot up with the "c7200p-" boot image. They use the prefix "c7200-".
2. For information about the Cisco 7206 or Cisco 7206VXR as router shelves in the Cisco AS5800 Universal Access Server,
refer to the Cisco AS5800 Universal Access Server documentation listed in the
3. The Cisco uBR7246VXR universal broadband router requires the Cisco uBR7200-NPE-G1 version of the NPE-G1.
4. The Cisco uBR7246VXR universal broadband router requires the Cisco uBR7200-NPE-G2 version of the NPE-G2.
Table 8-5
1
Router Platform
Cisco 7200 series
Cisco 7204VXR
•
and
Cisco 7206VXR
OL-4448-12
Software Requirements for the NPE-400, NPE-G1, and NPE-G2
Network Processing Engine
NPE-400
Cisco uBR7246VXR Cisco IOS Release
12.1(6)EC or later
releases of 12.1EC with
a special boot helper
image of 12.0(15)SC
[ubr7200-boot-mz.120-
15.SC]
Cisco IOS Release
12.2(4)BC1 or later
releases of 12.2BC
Cisco IOS Release
12.3(9a)BC or later
releases of 12.3BC
Cisco uBR7225VXR —
Software Requirements for the NPE-100, NPE-150, NPE-200, and NPE-300
Network Processing Engine
2
NPE-100
Cisco IOS Release 12.0(2)XE2 or later releases of 12.0XE
Cisco IOS Release 12.0(3)T or later releases of 12.0T
Network Processing Engine and Network Services Engine Installation and Configuration
NPE-G1
Cisco IOS Release
12.2(11)CX
special boot helper
image of
12.2(11)CX
[ubr7200-boot-mz.
122-11.CX or
ubr7200-kboot-mz.
122-11.CX]
Cisco IOS Release
12.2(33)SCA or
later releases of
12.2S
Cisco IOS Release
12.2(33)
Cisco IOS Release
12.2(33)SCA with a
boot helper image
[ubr7200-boot-mz.
122-33.SCA] or
[ubr7200-kboot-mz
.122-33.SCA]
2
NPE-150 NPE-200
Software and Hardware Requirements
NPE-G2
Cisco IOS Release
3
with a 12.2(33)SCA
The NPE-G2 uses
Note
software images
that begin with
the prefix
"ubr7200p-".
Cisco IOS Release 12.2S
"Related Documentation" section on page
2
NPE-300
4
iii.
2
8-5