Nse-1 Error Messages - Cisco NPE-175 Installation And Configuration Manual

NSE-1 Error Messages

•
NSE-1 Error Messages
If the PXF processor crashes or hangs, check the syslog for any error messages.
You may see error messages similar to the following messages.
•
•
Network Processing Engine and Network Services Engine Installation and Configuration
10-10
show pxf feature nat ?
Router# show pxf feature nat ?
entry toaster nat entry
stat toaster nat processing info
tcp toaster nat tcp logging info
Router# show pxf feature nat entry
--- 171.69.12.175
--- 171.69.12.161
--- 171.69.12.162
--- 171.69.12.163
--- 171.69.12.164
--- 171.69.12.165
--- 171.69.12.166
Router# show pxf feature nat stat
NAT translation processing information
total nat entries = 0x1000, entries (used, free) = (0x7, 0xFF9)
untranslated flows:0x7022D
translated flows:0x1030
icmp extendable flows:0x0
noop alloc miss:0x0
entry alloc miss:0x0
entry delete miss:0x0
PXF processor crash and error message:
WARNING:PXF Exception:mac_xid=0x10000
*** IHB watchdog timer expired
6d16h:%PXF-2-EXCEPTION:pxf exception on pxf tmc.
Workaround: Run the show pxf crash command to obtain more information.
PXF processor hang and error message:
WARNING:PXF Exception:mac_xid=0x8
*** External Memory Column 3 exception, type = 20
If you see this error message, the PXF processor has been left in HALT state. During bootup, the
PXF processor is in error state and cannot be brought up.
Workaround: Reboot the router.
Chapter 10
192.168.0.129 ---
192.168.0.7 ---
192.168.0.2 ---
192.168.0.3 ---
192.168.0.4 ---
192.168.0.13 ---
192.168.0.5 ---
Configuration Tasks and Troubleshooting Information
---
---
---
---
---
---
---
OL-4448-12